Publicidad
Idiomas disponibles
Idiomas disponibles
5.4. Selecting the user
With the unit powered off:
a) Press the TIME button to toggle between user 1 and
user 2.
b) Press the MEMORY button to confirm your user selection.
5.5. Taking a measurement
After the cuff has been appropriately positioned the
measurement can begin.Remain still during your mea-
surement, do not flex muscles.
a) Remain seated quietly for 5 minutes before you
begin the measurement.
b) Press the POWER button to begin. After pressing
the POWER button you will hear a series of short
beeps and the pump begins to inflate the cuff. The
measurement is performed while cuff inflates. The
pumping speed can vary, which is completely nor-
mal. The increasing cuff pressure will show on the
display.
c) When the device has detected the pulse, the heart
symbol in the display begins to blink.
d) When the measurement has been concluded, air in
the cuff is released. The measured systolic and
diastolic blood pressure values as well as the pulse
are now displayed. (Pulse=number of heartbeats
each minute) Example (Fig.): Systolic 118, Diastolic
73, Pulse 75. The measurement results are dis-
played for about one minute.
Pulse Detected -
Unit measuring
17
Publicidad
