Singsation RHAPSODY Guia De Inicio Rapido página 5

Using the Light Show
Front
The Singsation Rhapsody has a light show that
turns on when the speaker is on by default.
To turn off/on the speaker's light show: Press
and hold the button on the front of the
speaker.
Using Other Audio Sources
In addition to Bluetooth audio, the Singsation Rhapsody has four other
audio sources you can use: FM radio, USB memory, SD card, and an
auxiliary input.
To use FM radio: Press the
button on
Front
the front of the speaker. The first time
you use the FM radio, press the /TWS
button on the front of the speaker to scan
available stations (this takes a few minutes
to complete). Then use the or buttons
to go to different radio stations.
To use a USB memory stick or SD card: Plug the memory stick or SD card
into the USB or TF CARD slots on the front of the speaker. If there are
MP3 music files in the top directory of the memory stick or SD card, the
speaker will automatically start playing them.
Note: The speaker offers additional functions for music playback from an SD card or USB
memory stick. Press the EQ button on the remote to go through the different EQ settings
(the name of each is shown on the display). Press the RPT button to repeat a track.
These functions work for the USB memory stick or SD card only.
To use an auxiliary audio source: Plug your auxiliary audio source into
the AUX input on the front of the speaker using a 3.5mm audio cable (not
included). The speaker automatically switches to the auxiliary input.
To return to Bluetooth audio: Press the
button on the front of the
speaker until the display says "BT."
5