Publicidad
Idiomas disponibles
Idiomas disponibles
14 Cleaning and maintenance
Tools to be repaired should be brought to the service center. The use of original parts will
ensure the correct and safe operation of the tool.
Disconnect the battery from the tool before checking, doing maintainance, repairing or
cleaning the tool to avoid the danger of accidental tool activation.
Warning!
In particular situations, the chain and handle could reach high temperatures. It is recommended to
handle the chainsaw with care using protective gloves.
Wear protective gloves before carrying out operations on the chain.
Warning!
Before any maintenance or cleaning operations, remove the battery from the chainsaw. Accidental
starting can cause serious injury.
Frequent checks of the tool will make it safe and reliable.
•
Do not spray the tool with water and do not immerse it, it may cause a short circuit inside the tool.
•
Keep the handle and any motor ventilation devices clean, use a cloth to clean the tool. Do not use
aggressive products to clean the tool to avoid damaging surfaces
•
Clean the body of the chainsaw with a damp cloth.
•
Remove the protective pinion cover.
•
Clean the area around the pinion and the body with a damp cloth.
•
Remove the bar and the chain as specified in paragraph 14.2.
•
Clean the oil outlet (1), oil inlet (2) and rear bar slot (3) with a soft bru
•
Clean the chain with a soft brush.
1
sh.
2
3
42
Publicidad
