Publicidad
Idiomas disponibles
Idiomas disponibles
Hazard information
Warning
• Mounting, installation and servicing work on electrical devices may only
be performed by a qualified eletrician. Failure to observe this regulation
could result in the risk of serious damage to health or fatal injury due to
electric shocks.
• Devices with 110-240 V connection: The device may only be connected
to an easily accessible power socket outlet. The mains adapter must be
pulled out if a hazard occurs.
• For power supply, only use the original plug-in mains adapter
delivered with the device, separately available DIN rail power supplies
or a recommended PoE-Switch/PoE-Injector as specified in this
manual.
• Because of electrostatic charging, direct contact with the circuit board
can result in destruction of the device. Direct contact with the circuit
board must therefore be avoided at any time.
• Observe the EN 60065 resp. EN 60950 resp. EN 62368 standard.
• Do not use the device if there are signs of damage to the housing, control
elements or connecting sockets, for example, or if it demonstrates a
malfunction. If you have any doubts, please have the device checked
by an authorized expert.
• Do not open the device. This voids the warranty of the device. The device
does not contain any parts that can be maintained by the user. In the
event of an error, please have the device checked by an authorized expert.
• For safety, approval and licensing reasons (CE/FCC/IC etc.), unauthorized
change and/or modification of the device is not permitted.
• The device is not a toy: do not allow babies and children to play with it.
• To avoid the danger of suffocation, keep any packing materials away from
babies and children. Plastic films/bags, pieces of polystyrene, etc. are not
a toy and can be dangerous in the hands of a child. Discard any packing
materials immediately after removing the product. Do not reuse packing
materials.
• Always lay cables in such a way that they do not become a risk to people
and domestic animals.
• Voltage is applied to parts within the equipment. Do not touch any parts
that are not associated with the installation, wiring, or connection. Electric
shock could result.
• On devices which are not marked as weather-proof: Keep the device
away from water or any other liquid.
EN
3
Publicidad
