Publicidad
Nº
Name
1
MODE
2
FAN SPEED
3
4
5
ON/OFF
AIR
6
DIRECTION
7
8
9
CLOCK
10
TIMER ON
11
TIMER OFF
12
RESET
13
LOCK
14
OK
15
COOL/HEAT
16
ECO
Once pressing, running mode will be selected in the following sequence: Auto,
Cool, Dry, Fan, Heat.
Fan Speed can be selected by pressing this button: Auto, Low, Medium and
High.
Decrease the set temperature. Keeping pressed will decrease the temperature
with 1ºC per 0.5s.
Increase the set temperature. Keeping pressed will increase the temperature
with 1ºC per 0.5s.
Press this button to turn on / off the fan coil unit.
Press this button to change the angle of the air deflector.
Vertical Swing. Turn on / off automatic vertical swing of the air deflector.
Without use.
Display the current time. (12:00 is displayed when resetting or electrifying for
the first time). Press CLOCK for 5s, icon indicating hour will flash. Press it
again, icon indicating minute will flash.
and
are used to adjust the figure.
Setting or modification is effective only by pressing OK button to make
confirmation.
For timer ON setting. Once pressing this button, the time will increase by 0.5
hour. Adjusting the figure to 0.00 will cancel timer ON setting.
For timer OFF setting. Once pressing this button, the time will increase by 0.5
hour. Adjusting the figure to 0.00 will cancel timer OFF setting.
(Inner located). Press this button with a needle of 1mm to cancel the current
setting and reset remote controller.
(Inner located). Press this button with a needle of 1mm to lock or unlock the
current setting.
Used to confirm the time setting and modification.
(Inner located). Press this button with a needle of 1mm to shift mode between
COOL only and COOL&HEAT. During setting, back light will be lightened.
Factory default mode is COOL &HEAT.
Activate or turn off economic operation mode.
Operating Description
Publicidad
