Box Fan Use Instructions
Children must not play with this appliance.
Cleaning and maintenance cannot be carried out by unsupervised
children.
For the safety of children and pets, remove and dispose of all
packaging material before use.
This fan is intended for home use only, as described in this manual.
Any other use is to be considered improper and, therefore, dange-
rous.
Description of product Fig.A
1. Handle
2. Switch/speed selector
3. Standing feet
Assembling Fig.B
Proceed to fix the standing base as shown in fig. B above; make sure they are well fastened to avoid dange-
rous vibrations during use.
Operation
To switch the fan on, place the speed selector on the desired speed position (iIIIII); to switch the fan off,
place the speed selector on 0.
Cleaning and maintenance
Unplug the fan from the wall socket. Remove dust and stains from outer surface with a soft cloth slightly
dampened – use mild detergent if necessary.
Warning: do not let water or other liquids penetrate inside the fan.
Do not use abrasive detergents and/or solvents, to avoid damaging the surface of the fan.
Wait until the fan is completely dry before use. When not used for a long period of time, store the fan in a cool,
dry place, away from dust and direct sunlight.
Technical data
Power 60W
220-240V 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without
any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
9
EN