Beper P206VEN161 Manual De Instrucciones página 11

Multidirectional Fan with LED Display Use Instructions EN
Children must not play with this appliance.
Cleaning and maintenance cannot be carried out by unsupervised
children.
For the safety of children and pets, remove and dispose of all
packaging material before use.
This fan is intended for home use only, as described in this manual.
Any other use is to be considered improper and, therefore, dange­
rous.
Description of product
1. Main unit
2. Control panel and display
3. Main unit blocking screw
4. Standing pole
5. Base
6. Base blocking screw
Assembling Fig.A
Place the base on a flat and stable surface. Remove the blocking screw from the standing pole, insert the pole
inside the hole at the center of the base, and insert the screw turning it clockwise.
Remove the blocking screw from the back of the main unit, insert the unit on the standing pole and block it
with the screw, by turning it clockwise.
Operation Fig.B
1. Room temperature/speed/timer indicator
2. Speed selection
3. Mode selection
4. Timer
5. Swing key
6. ON/OFF key
7. Remote Control
Place the fan on a flat and stable surface; connect the plug to a wall socket – the fan makes a beep sound,
and the LED display turns on showing the room temperature.
Press the ON/OFF key to switch the fan on. The fan activates in default mode, operating at low speed 1.
Press the speed selection key to select the speed, between 1 (low), 2 (medium) and 3 (high): display shows
the related indication.
Press the timer key to activate the auto shut off of the fan: press the key until the desired time is shown on
the display, between 1 (min) and 12 (max) hours – the display will alternatively show the set time, and the set
speed. When the set time goes off, the fan will automatically shut off.
Press the swing key to activate automatic swing function – press the key again to deactivate the function.
Press mode key to set the desired fan mode:
NATURAL ( ): the fan will recreate a natural breeze alternating all 3 speeds
SLEEP ( ): the fan speed gradually decreases from high to low every half hour, continuing to operate at low
speed until shut off
CONSTANT ( ): the fan operates at medium speed (2) until shut off.
Tilt angle of fan head can be manually adjusted up to 90°.
All functions selectable from the control panel can also be activated from the remote controller provided.
The remote controller provided with this appliance contains a pre­installed lithium battery. To activate the
battery, remove the plastic film.
Keep the remote controller and battery out of the reach of children.
11