Descargar Imprimir esta página

MaxPro PROFESSIONAL MPCS1300/185L Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

An es ma
of the level of exposure to vibra
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Iden fy
safety measures to protect the operator from the effects of vibra
the tool and the accessories, keep the hands warm, organisa
APPLICATION
Y
aw has been designed for sawing wood, metal and plas
are devoted to con
the technical performance and design concept of products may vary without any prior
for any possible incurrence of inconvenience therefrom. Read and follow the opera
safety informa
efore using for the firs
WARNING
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all ins
Failure to follow the warnings and ins
shock, fire and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plas
noise output may exceed 85dB(A) at the workplace. In this instance, wear ear prot
GENERAL SAFETY
Read all safety warnings and all ins
electric shock, fire and/or serious injury.
Save all warnings and ins
for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or ba ery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Clu ered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while opera
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet c
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When opera
a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If opera
g a power tool in a damp loca
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when opera
2
should also take into account the mes when the
such as: maintain
work pa erns.
improving and perf
the exis
products. Therefore,
instruc
ave this manual.
may result in electric
bags! Danger of suffoca
The power tool
Failure to follow the warnings and ins
a power tool. Distr
can cause you to lose
Water entering a power tool will increase the risk
is unavoidable, use a residual current device (RCD)
a power tool. Do not
GB
use a power tool while you are red or under the influence of drugs, alcohol or medica
of ina en
b) Use personal prot
mask, non-skid safety shoes, hard hat, or hearing protec
personal injuries.
c) Prevent uninten
source and/or ba ery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjus ng key or wrench before turning the power tool on. A wrench or a key le a ached
to a rota
f
our apology
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
and
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the c
connected and properly used. Use of dust c
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applica
will do the job be er and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the
power source and/or the ba ery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preven ve safety measures reduce the risk of st
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these ins
may result in
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other c
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cu
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these ins
account the working c
Use of the power tool for opera
5) Service
a) Have your power tool serviced by a qualified repair person using only iden cal replacement parts.
This will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR CIRCULAR SAW
1) CUTTING PROCEDURES
a) DANGER : Keep hands away from cu
handle, or motor housing. If both hands are holding the saw, they can not be cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot protect you from the blade below the
workpiece.
c) Adjust the cu
should be visible below the workpiece.
d) Never hold the workpiece being cut in your hands or across your leg. Secure the workpiece to a stable
pla orm. It is important to support the work properly to minimize body exposure, blade binding, or loss
of control.
e) Hold the power tool by insulated gripping surfaces only, when performing an opera
cu
tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
ra
ower tools may result in serious personal injury.
ve equipment. Always wear eye prot
al star
Ensure the switch is in the off-posi on before connec
g part of the power tool may result in personal injury. e) Do not overreach. Keep proper
a
This enables be er control of the power tool in unexpected situa
of dust extr
can reduce dust-related hazards.
to operate the power tool. Power tools are dangerous in the hands of
that may affect the power tool's opera
tools sharp and clean. Properly maintained cu
work to be performed.
fferent from those intended could result in a hazardous situa
g area and the blade. Keep your second hand on auxiliary
depth to the thickness of the workpiece. Less than a full tooth of the blade teeth
GB
A moment
Prot
ve equipment such as dust
used for appropriate condi
will reduce
to power
and c
n f
ensure these are
The correct power tool
ower
If damaged, have the power tool repaired
tools with sharp cu
edges are less
s, taking into
where the
3

Publicidad

loading

Este manual también es adecuado para:

Mpcs1500/190l