AnyTone SMART II Manual De Instrucciones página 15

2.HOW TO USE THIS RADIO
2.6 Mode Control
1. Short press
2. The LCD displays the selected mode.
2.7 Keypad Lock
1. Hold
2. Hold
dissppears.
» In lock Mode all keys except PTT is valid.
2.8 Emergency Channel
1. Short press
2. Short press
on LCD.
3. Short press
2.9 VOX
......................................................................................................
1. Press and hold the [PTT] switch;
2. Short press
displayed when the function is active.
2.10 Scan Function
1. Press and hold microphone [ UP ] or [ DN ] button for 7 seconds or until
a beep sounds to start scan function. The dot between the two channel
digits flashes to indicate that the function is active.
2. Turn rotary knob or press microphone [ UP ] or [ DN ] button to change
scan direction during scan.
3. Short press
2.11 Norms Control
1. Hold
2. Turn rotary knob or press microphone [ UP ] or [ DN ] button to choose
wanted norms.
3. Power off and power on again.
.......................................................................................
key to switch between
........................................................................................
key for over 3 seconds to lock the keys, LCD displays "
key for over 3 seconds again to unlock the keys, "
..........................................................................
key to choose CH9, the channel number blinks on LCD.
key again to choose CH19, the channel number blinks
key third time to return to last normal channel.
key to activate or deactivate the VOX function. "
.....................................................................................
or [PTT] key to exit scan function.
....................................................................................
to power on radio, until LCD displays the norms;
/ mode.
".
"
" is