AnyTone SMART II Manual De Instrucciones página 16

2.HOW TO USE THIS RADIO
2.12 Install External Speaker
Choose a 16Ω external speaker with 3.5mm mono connector.
» WARNING:The sound output mode of the machine is BTL output, and the two
pins of the speaker cannot be connected to the ground net or the machine
shell! Otherwise, there will be a large DC current flowing through the speaker,
which will burn the speaker and components.
2.13 Menu Operations
1. Long press
2. Turn rotary knob or press microphone [ UP ] or [ DN ] button to choose
menu to be.
3. Short press
chosen function, the parameter blinks on LCD.
4. Turn rotary knob or press microphone [ UP ] or [ DN ] button to choose
wanted setting.
5. Short press
6. Long press
MENU.
LCD Display
...................................................................
....................................................................
key to enter menu list.
knob to enter function setting parameter of the
PUSH
knob to validate the mode and exit setting.
PUSH
knob or [PTT] key or wait 10 seconds to store exit
PUSH
Function Detail
Beep sound
RB sound setting
RF power setting
Setting Details
: turn on beep sound
: turn off beep sound
Default:
, ~
: turn off RB sound function
Default:
: low power
: middle power
: high power
Default:
Note: This function is valid only when the
radio work in HF model or HAM model.