EU-Konformitätserklärung
Hiermit erklären wir, dass die nachfolgend bezeichnete
Maschine aufgrund ihrer Konzipierung und Bauart so-
wie in der von uns in Verkehr gebrachten Ausführung
den einschlägigen grundlegenden Sicherheits- und Ge-
sundheitsanforderungen der EU-Richtlinien entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Ma-
schine verliert diese Erklärung ihre Gültigkeit.
Produkt: Pumpe
Typ: 1.645-xxx
Einschlägige EU-Richtlinien
2014/35/EU
2014/30/EU
2011/65/EU
2009/125/EG
Angewandte Verordnung(en)
(EU) 2019/1781
Angewandte harmonisierte Normen
EN 60335-1
EN 60335-2-41
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
Die Unterzeichnenden handeln im Auftrag und mit Voll-
macht des Vorstands.
Dokumentationsbevollmächtigter:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/06/01
8
General notes......................................................
Intended use .......................................................
Hazard levels ......................................................
Environmental protection ....................................
Accessories and spare parts...............................
Scope of delivery.................................................
Warranty..............................................................
Device description...............................................
Startup.................................................................
Operation ............................................................
Care and maintenance........................................
Transport .............................................................
Storage................................................................
Special accessories ............................................
Troubleshooting guide.........................................
Specifications ......................................................
Characteristic curves...........................................
Declaration of Conformity....................................
Read these original operating instructions and the en-
closed safety instructions before using the device for
the first time. Proceed accordingly.
Keep both books for future reference or for future own-
ers.
This device has been developed for private use and is
not intended for the loads imposed by commercial use.
This device is intended for indoor use only.
Note
The pump is not suitable for boosting the existing line
pressure.
Permissible feed fluids
Permissible feed fluids:
● Processed water
● Well water
● Spring water
● Rain water
● Swimming pool water with intended dosage of addi-
tives
The temperature of the delivered liquid must not exceed
35 °C.
Note
The manufacturer accepts no liability for possible dam-
age caused by improper use or incorrect operation.
DANGER
● Indication of an imminent threat of danger that will
lead to severe injuries or even death.
WARNING
● Indication of a potentially dangerous situation that
may lead to severe injuries or even death.
CAUTION
● Indication of a potentially dangerous situation that
may lead to minor injuries.
ATTENTION
● Indication of a potentially dangerous situation that
may lead to damage to property.
English
Contents
General notes
Intended use
Improper use
Hazard levels
8
8
8
9
9
9
9
9
9
10
10
10
10
10
10
11
11
12