Würth POWERQUAD M AC/R Traducción Del Manual De Instrucciones De Servicio Original página 7

Intended use
This appliance/product is designed for professional use
in industry and trade. The appliance/product is used as
intended if it is used exclusively for illuminating ordinary
work areas and if the specifications stated in the technical
data are observed. Any other use or use beyond this is not
permitted.
Foreseeable misuse
The appliance must not be used,
• in areas with harmful gases, oils, acids, radiation,
etc.
• in potentially explosive atmospheres
Technical data
Non-stationary
workplace lamp
Lamp luminous flux
Luminous flux of illuminant 5,300 lm
Colour temperature
Operating voltage
Capacity rating
Lamp's degree of protection IP54
Mains adapter's degree of
protection
Lamp's protection class
Mains adapter's protection
class
Impact protection rating
Lithium-ion batteries
Mains adapter line
Cable length
Earthed power outlet or
shaped plug
Charging temperature
range
Dimensions (H x W x D)
Weight approx.
Art.
0827 981 501
4,000 lm
5,000 K
220 – 240 V AC,
50/60 Hz
36 W
IP44
III
II
IK08
14.8 V DC, 2,600 mAh
H05RN-F2x1.0 mm² black
5 m
CEE 7/17 shaped plug
according to German/
Austrian and Belgian/
French standard
+5°C to +30 °C
320 x 300 x 125 mm
2,700 g
Legend
Explanation of pictograms
Lamps with limited surface temperature
IP54 Degree of protection
Dust-proof
Splash water-proof
Compliance with EU directives
Electronic scrap (WEEE directive)
Batteries are not household waste
Permitted in difficult conditions
Protection class II
Protection class III
Do not look in the light source.
Charging process
Before taking the hand lamp into service for the
■
first time charge it for 6-8 hours.
Connect mains adapter to lamp.
■
3 Running light of the remaining running time
display starts when charging.
• Charging is complete as soon as the battery
capacity "100%" is displayed and all LEDs of
the remaining time display light up.
Characteristics
— At a battery capacity of 10%, the lamp dims
automatically to the lowest brightness level
(5%). The luminous flux can be adjusted up-
wardly again using the +/- button.
— Remaining running time < 30 minutes: Every
5 minutes, the LED panel flashes twice.
— Remaining running time < 15 minutes: Every
minute, the LED panel flashes twice.
13