Publicidad
◇ Check all the terms of WARNING and CAUTION.
◇ Check scratches, bending or crack on the lift table.
◇ Check smooth movement of the table.
◇ Check if there is any hydraulic oil leakage.
◇ Check the vertical creep of the table.
◇ Check if all the bolts and nuts are firmly tightened.
5. OPERATING THE LIFT TABLE
■
LOADING
Load should be distributed on the lift table equably.
■
Lifting the Table
◇ Screw and loose emergency stop switch.
◇ Push the UP button and power pack starts to work to lift the
load.
◇ Loose the UP button and power pack stops working.
■
LOWERING THE TABLE
◇ Push the DOWN button and the table will lower.
◇ Loose the DOWN button and the table will stop.
NOTE
◇ The table is equipped with an aluminum guard to avoid
accidental danger.
◇ If aluminum guard strikes an object while the table lowers,
stop operation and check the lift table. After making sure no
any abnormality, strike the UP button slightly and then the
electric system will function as before.
CAUTION!
table. Ensure the balance of loading. Do not
load partially or concentrically.
WARNING!
Do not put foot or hand in
scissors mechanism.
Do not overload the lifting
Publicidad
