Publicidad
3. Mounting toys on the feeding tray – See Figure 4
Insert the toys (D) into the holes located on the tray. With light pressure, fix
them, making sure that they are securely attached to the tray. To remove the
toys, clench the bottom of the toy and pull it out of the slot.
FITTING THE BOSSTER SEAT TO THE ADULT CHAIR – FIGURES 5 and 6
1. Place the booster seat on an adult chair with minimum dimensions indicated
in Figure 8.
2.Wrap the webbing strap around the back of the adult chair and fasten buckle
to secure.
3. Wrap the webbing strap around the seat of the adult chair and fasten buckle
to secure.
4. Adjust the webbing straps to tighten if required. Tighten the belts from the
length adjustment buckles so that the booster seat is securely fixed and
stationary in relation to the chair.
Important! Things on which to pay attention when isntalling the booster seat
on the adult chair:
•
Always use both sets of chair straps to completely secure booster to
the chair.
•
Make sure all pieces are assembled and fixed correctly.
•
If chair is cushioned and cushion cannot be removed, be certain that
the bootom chair strap is fastened snugly after putting child in the
seat.
INSTALLING THE RESTRAINT SYSTEM – FIGURE 7
Always secure child in booster seat using restraint straps. Never place the child
on the booster seat without the safety belts. Unbutton the mechanism before
placing the baby. Place the baby and fasten the belts (you will hear a "click"
sound when properly fixed in the buckle). Fasten the belts around the child's
waist in a position that is comfortable for him. Check the restraint system by
pulling it slightly away from your child. The restraint system must remain
attached.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Cleaning and storing the product:
• Wipe the plastic and metal parts of the product only with soft cloth wetted
with warm water.
18
Publicidad
