Descargar Imprimir esta página

Vito Agro VIRMF33 Manual De Instrucciones página 42

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
4. FOR SAFE OPERATION
1. Read this manual carefully until
you completely understand and
follow all safety and operating
instructions.
2. Keep this manual handy so
that you may refer to it later when
ever any questions arise. Also
note, if you have any questions
which cannot be answered herein,
contact the dealer from whom you
purchased the product.
3. Always be sure to include this
manual when selling, lending, or
otherwise transferring the ownership
of this product.
4. Never allow children or anyone
unable to fully understand the
directions given in the manual to
use the machine.
WORKING CONDITION
1. When using the product, you should
wear proper clothing and protective
equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face
protector
(4) Thick work gloves
(5) Non-slip-sole work boots
42
2. And you should carry with you.
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working
area (rope, warning signs)
(5) Whistle (for collaboration or
emergency)
(6) Hatchet or saw (for removal of
obstacles)
3. Do not wear loose clothing,
jewelry, short trousers, sandals, or
go barefoot. Do not wear anything
which might be caught by a moving
part of the unit. Secure hair so it is
above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a closed
room or building. Exhaust gases contain
dangerous carbon monoxide.
2. Never use the product,
(a) when the ground is slippery or
when you cant maintain a steady
posture.
(b) At night, at times of heavy fog,
or at any other times when your
field of vision might be limited and
it would be difficult to gain a clear
view of the working area.
(c) During rain storms, during
lightning storms, at times of strong
or gale-force winds, or at any other
times when weather conditions might
make it unsafe to use the product.
WORKING PLAN
1. You should never use the product
when under the influence of alcohol,
when suffering from ex-haustion or
lack of sleep, when suffering from
drowsiness as a re-sult of having
taken cold medicine or at any other
time when a possibility exists that
your judgment might be impaired
or that you might not be able to
operate the product properly and in
a safe manner.
2. When planning your work
schedule, allow plenty of time to
rest. Limit the amount of time over
which the product is to be used
continuously to somewhere around
30 - 40 minutes per session,
and take 10 - 20 minutes of rest
between work sessions.

Publicidad

loading