Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Section 6. Maintenance
WARNING
To avoid electric shock and other hazards which could result in
permanent injury or death, disconnect (unplug) the cleaner from the
power source before performing any cleaning and maintenance.
Figure 17. Charging Station Distance to Pool Edge
6.1
Clean the Cleaner and Charging
Station
1.
Always dry the cleaner before setting on the
charging station.
2.
Clean the charge plates ON the charging
station using a cloth or scouring pad. DO NOT
use metal sponges or brushes and solvents or
salt water.
Figure 18. Clean the Charge Plates
3.
Clean the charge plates UNDER the cleaner
using a cloth or scouring pad. DO NOT use
metal sponges or brushes and solvents or
salt water.
4.
Rinse the cleaner and charging station
thoroughly with clean water.
5.
Dry the cleaner and charging station with a
towel. DO NOT leave the cleaner and charging
station to dry in the direct sun.
Page 14
11.5 ft
(3.5 m)
Polaris
FREEDOM
®
™
6.2
Clean the Filter Canister
The filter canister should be cleaned at the end of
each cycle.
1.
Push the cover lock and lift the cover until it is
secured in the vertical position.
Figure 19. Lift Cleaner Cover
2.
Remove the filter canister assembly from the
body.
3.
Empty all debris from the filter canister, then
rinse the filter and the cleaner using a hose.
Figure 20. Remove and Wash the Filter Canister
NOTE: Periodically, remove the filter canister and clean
thoroughly with soapy water and a soft bristle
brush
4.
Replace the filter canister into the cleaner.
5.
Store the cleaner on the charging station out
of direct sunlight.
Cordless Robotic Cleaner | Owner's Manual
Publicidad
