Publicidad
Idiomas disponibles
Idiomas disponibles
To remove your memory card:
• Press the card and release. The card will pop up;
• Pull the card out by holding the end of the card.
9.7 Connecting an External Device
Connecting to the USB port
Your computer comes with three USB ports. Once you plug a USB device into
any of them, Windows automatically loads a driver for that device. After the
driver has been loaded one time, you can disconnect a nd reconnect the same
device without performing any additional steps.
Note:
If Windows requires you to install the driver before connecting, check
the documentation provided by the device's manufacturer before
connecting the device.
Note:
If your USB device uses a power cord, connect the device to a power source before
connecting it.
To disconnect a USB storage device,
make sure you click the Safely Remove
Hardware icon (as shown on the left)
in the notification area of the taskbar
t o r e m o v e t h e d e v i c e b e f o r e
disconnecting.
Connecting to the DisplayPort or HDMI port
You can connect your external display device
such as a monitor, TV, or projector to your
laptop, if such device has a HDMI port. By doing
so, you have a wider view when you give a
presentation or watch a video or movie.
1. Power off the external device;
2. Locate the HDMI port on your laptop;
3. Connect one end of your cable to the port, and the other end to the port on
the external device;
4. Power on the external device. When connecting a TV, you may need to configure
your TV to external device mode;
5. Open the Settings screen, select <System>and then <Display>;
6. Click <Multiple displays> to open the drop-down list;
7. From the list, select your desired monitor mode;
8. Click <Apply> and confirm your setting.
14
Publicidad
