BS Charger PB-02 Manual De Instrucciones página 4

RISK OF EXPLOSION AND FIRE!
A battery being charged can emit explosive gas.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against shortcircuiting.
ACID PROJECTION HAZARD!
• Wear safety goggles and protective gloves.
• If your eyes or skin come into contact with battery acid, rinse the affected part of the body with plenty of water and
seek immediate medical assistance.
CONNECTION / DISCONNECTION
• Disconnect the power supply before connecting/disconnecting the device to/from the battery.
• The terminal of the battery that is not connected to the car frame must be connected first. The other connection must
be made on the car frame, far from the battery and the fuel line.
• After the start-up operation, disconnect the booster. First remove the chassis connection and then the battery
connection, in the order shown.
ENTRETIEN
• The power supply cable cannot be replaced. If the cable is damaged,the device should not be used. Service should
be performed by a qualified person.
• Warning! Always remove the power plug from the wall socket before carrying out any work on the device. Under no
circumstances should solvents or other aggressive cleaning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
REGULATIONS
• The device complies with European Directive.
• EAC conformity mark (Eurasian Economic Commission).
• Equipment in compliance with British requirements.
DISPOSAL
• This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic waste.
• The battery must be removed from the device before the latter is discarded.
• The battery must be dropped off at a suitable recycling facility.
• The device must absolutely be disconnected from the power supply network before removing the battery.
MAIN FEATURES
• Compact & powerful lithium booster rated at 600A (1200A peak current)
• Up to 20 jump starts in one charge
• Designed for gas and diesel engines
• Very safe: Smart cable with spark-proof connection and reverse polarity protection
• Power supply for small electronic devices via their USB ports. Most of smartphones, earphone, portable gaming
devices, MP3/MP4 players can be charged with the included accessories
• LED flashlight function with 3 modes
• LED display with battery state of charge indication and output port used
Extreme outside temperatures or mechanical problems on the vehicle (poor starter, no fuel or engine
⚠
problems) can limit the booster's capacity.
OPERATION
Press the ON / OFF button. The display shows the remaining power and the activated output ports.
1.
The display shows a percentage charge from 0% to 100% when the Power Box is fully charged.
2.
⚠
Recharge the Power Box before first use and after each use.
| www.bs-battery.com PB-02
4