AKASO BRAVE 4 PRO Manual Del Usuario página 13

EN
14. Motion Detection: Off/On
Default setting is Off.
Motion detection is the process of detecting a change in the position of an object
relative to its surroundings or a change in the surroundings relative to an object.
Turn on Motion Detection and camera, the camera records video automatically when
it detects a change in the position of an object relative to its surroundings.
15. Photo Resolution: 20MP, 16MP, 13MP, 8MP
Default setting is 20M.
16. Anti-shake: Off/On
Default setting is Off.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion including
cycling, motorcycling, and handheld uses.
17. Burst Photo: 3P/s, 5P/s, 10P/s
Default setting is 3P/s.
Burst captures up to 10 photos in 1 second, so it is perfect for capturing fast-moving
activities.
18. Time Lapse Interval: 0.5Sec/1Sec/2Sec/5Sec/10Sec/30Sec/60Sec
Default setting is 0.5Sec.
Time Lapse Video creates video from frames captured at specific intervals. This
option lets you capture a time lapse event and immediately view or share it as a video.
Note: Time Lapse Video is captured without audio.
19. Photo Interval: 3Sec/10Sec/20Sec/30Sec/60Sec
Default setting is 3Sec.
Turn off the Self Timer, go back and you can see Time Lapse icon. Click it and enter
the setting, you will find Photo Interval. This camera continuously takes pictures at
the set time interval until it stops manually.
11