Bontempi 15 3785 Libro De Instrucciones página 6

E N G L I S H
1. POWER SUPPLY: USB-DC CABLE
The instrument can be
powered by a power bank,
PC, phone charger, etc. with
the USB-DC cable supplied.
Insert the DC jack in the
k
DC5V socket
.
2. MAINS SUPPLY
This instrument can be
powered by a mains
adaptor (not included) with
the following characteristics in output: VDC = 5V; I =
500 mA (positive central terminal).
WARNING: The transformer, power supply used with the electric
toy shall be regularly examined for damage to the supply cord,
plug, enclosure or other parts, and in the event of damage, it
shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy.
• the toy is not intended for children under 3 years old.
• the toy shall only be used with a transformer for toys or a
power supply for toys.
This toy is only to be connected to equipment
bearing either of the following symbols:
NOTE: Rating plate information was located at bottom
enclosure of the apparatus.
3. BATTERY SUPPLY
Use a screwdriver to open the battery compartment.
Insert 4 x 1.5 V batteries R6/AA (not supplied), ensu-
ring correct polarity
(+/–). Re-fit battery
cover. Replace batteri-
es when the quality of
sound becomes bad.
Use alkaline batteri-
es to obtain a longer
duration.
ATTENTION - BATTERY CARE
• Non-rechargeable batteries are NOT to be recharged. • Rechargeable batte-
ries must be removed from the product before being charged. • Rechargeable
batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted with correct pola-
rity. • Remove exhausted batteries to prevent leakage. • Do not short circuit
supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of batteries in the special containers
provided for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard
and corrugated board to the appropriate waste
4
collection centres. Plastic material must be placed in the relevant collection
containers.
The symbols indicating the various types of plastic are:
01 02 03
PET PE PVC
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04
for PE-LD • PVC =Polyvinyl chloride • PP= Polypropylene • PS= Polystyrene,
Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated
collection point or recycling facility. Alternatively, check with
your retailer and return the product when buying a replacement, on a one-
to-one basis or as free of charge in case the size is smaller than 25 cm.
Appropriate disposal promotes the recycling of parts and materials, as well as
helping to protect the environment and human health. Under current
legislation, strict penalties are enforced against those disposing of products
illegally. For more information about the collection of special waste, contact
your Local Authority.
SWITCHING ON/OFF
To switch on the instrument move selector POWER
ON. To switch off move the same selector to OFF.
DEMOSONGS
This keyboard has 10 demosongs.
To choose the pre-recorded tracks, press the DEMO ONE
n
in succession. Press DEMO ALL
key
demosongs in sequence.
When a song is playing, press + or –
or previous one, or enter a number from 0 to 9
one from the DEMOS list
q
Press START STOP to interrupt.
VOLUME CONTROL
Adjust volume to desired level by using the VOLUME
MIN ...... MAX
b
selector to increase or to reduce.
SOUND SELECTIONS
To select one of the 100 sounds recorded in the instru-
ment, press SOUNDS button
00 to 99 r to select one from the "SOUNDS" list
To select the next or previous sound, press + or – buttons
r
.
SUSTAIN
Prolongs the sound of a note when the key is released.
To enable or disable this function, press SUSTAIN
VIBRATO
The vibrato effect is a sound modulation.
To enable or disable this function, press VIBRATO
05 06 07
PP PS O
p
, to listen to the
r
to select the next
r
to select
f
.
p
and enter a number from
c
d
e
a
to
.
.
.