Manuales relacionados para Truper PULA-7N
Resumen de contenidos para Truper PULA-7N
- Página 1 Manual Variable 1.6 Hp 7” speed polisher Power Diameter Applies for Code Model 16673 PULA-7N PULA-7N Read the user’s manual thoroughly CAUTION before operating this tool.
- Página 2 Manual before Parts using the tool. Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Notes Authorized Service Centers Warranty Policy PULA-7N ENGLISH...
- Página 3 Technical Data PULA-7N Code 16673 Description Polisher Diameter 7” Voltage 127 V Frequency 60 Hz Current 10 A Power 1.6 Hp Speed Screwed thread size 960 RPM - 3 300 RPM 5/8-11-UNC-1A Duty cycle 50 minutes work per 20 minutes idle.
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for polishers • This power tool is intended to function as a polishing • Do not attach a woodworking saw blade or serrated tool. Read all safety warnings, instructions, illustrations, and blade. Such blades create frequent kickback and loss of specifications provided with this tool.
- Página 6 Parts Speed Spindle control lock Power cord protector Handle Power cord D-Handle Polishing Velcro bonnet Spindle disc lock Handle Lock-on button Trigger Velcro switch disc Carbon brush housing cap (x2) Polishing bonnet Assembly D-Handle assembly • Align the D-Handle with the polisher head and match Orifices to screw on the screw orifices.
- Página 7 Start Up Start up and operation control • Intermittent operation: Connect the plug into the power outlet. Press switch (A) to start the tool. To stop, release the switch. • Continuous operation: Connect the plug into the power outlet. Press switc (A) and block it pressing the continuous use button (B). To stop, press and release the switch.
- Página 8 Maintenance • Always disconnect the tool before cleaning it. • Never use water or other liquids. Use a brush only. • To prevent motor overheating clean regularly the ventilation slots. • Double-check the entire tool components are perfectly tight. • The tool housing shall not be cracked or damaged. •...
- Página 9 Notes ENGLISH...
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.