JBL 4329P Manual Del Propietário página 7

Stand-by Mode
The 4329P system will enter low power standby mode automatically when no signal activity
is detected at the active / selected source for >10 minutes.
While the system is in stand-by, the Power LED on both the Primary speaker and Secondary
speaker will illuminate solid Red color.
Waking the system from Stand-by mode and restoring it to normal operation can be
achieved by:
• A short press of any button on the Primary speaker.
• An Audio signal is detected through the last source selected (except USB or Optical), this includes Streaming and Bluetooth
Streaming as long as Network is On
Remote Control
Included with the 4329P system is a Bluetooth hand-held remote control allowing for easy control of the primary
operations of the system from up to 40' (12m).
• Power
• Mute
• Transport Skip back
• Transport Pause/Play
• Transport Skip forward
• Volume Up
• Volume Dn
Pairing the Bluetooth Remote
• On the 4329P Primary speaker, Press and hold the Volume/Mute button for >3 seconds.
• On the Remote control, Press the Streaming & Play/Pause/OK
button simultaneously.
4329P OM | Part No: 950-0628-001 | Rev 1.0 20221201
© 2023 HARMAN International Industries. Incorporated All rights reserved.
• Streaming
• BT Source
• USB Audion
• Digital (Optical in)
• Balanced input
• Aux-in (3.5mm)
• LED (Feedback purposes) located
adjacent to Power On/Off button
Long Press
> 2sec
Primary Speaker
VOLUME SOURCE/PAIRING
POWER
VOLUME/MUTE SOURCE/PAIRING
BTLE REMOTE pairing mode triggered
by a long press > 3 seconds
Pg 7 of 11
EN
NET
NET