Publicidad
Idiomas disponibles
Idiomas disponibles
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be fully
withdrawn.
Place the device on a solid, flat surface.
Do not install this device near open fires or other heating devices.
The product is ready to operate.
USE
Pour the liquid into the bowl.
Plug in the device and press the switch.
Turn the thermostat clockwise to the desired setting.
The temperature can be between 45° and 90°C.
When the temperature drops, the device starts heating again.
At the end of use, press the switch and unplug the appliance.
REMARKThe appliance is equipped with a safety system in case of overheating. In the event of tripping,
unplug the appliance and allow it to cool. If this protection system activates regularly, it is essential to contact
your retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back
of the device. To do this, wait for the temperature to drop, press the Reset button.
FR
Publicidad
