Urmet 2 VOICE 1760 Manual De Instalación página 6

JUMPER (JP3)
The following Jumper allows to adjust the line termination (Z) in case of in-out video door phone connection.
The line termination must be inserted into the last video door phone.
JP3
For position of jumpers JP1 and JP2 and dip-switch SW1 no.1 refer to the next chapter of the following
handbook.
4. VIDEO DOOR PHONE PERFORMANCE ACCORDING TO
CONFIGURATION METHOD
limitation will be present on the following performance.
Performance
Jumpers and DIP-
switches
Delay time on
reception of call
forwarding to CallMe
app
CallMe app auto-on
Panic alarm signalling
to CallMe App
6
Termination inserted (default)
Termination not inserted
Low rise block (Default)
(Power supply from
system BUS with WiFi
always active)
JP1
JP2
SW1 n.1
O N
=
No delay
Available
Available
Installation type (*)
High rise block
(Power supply from
system BUS with local power supply unit
WiFi active after call
forwarding)
JP1 JP1
JP2 JP2
SW1 n.1 SW1 n.1
O N
=
10 seconds
Not available
Not available
Local power
(Power supply from
Ref. 1760/110)
O N
=
No delay
Available
Available
DS1760-021