Integrated Stand For Table Top Use; Setup; Set Temperature Unit; Set Mtc Temperature Value - OHAUS STARTER 300C Manual De Instrucciones

EN-6
2.5

Integrated stand for table top use

Starter 300C has an integrated table stand as shown, which can be pushed out to use the meter
on a lab bench or desk. To close the stand, push the middle edge of the stand toward the meter.
3

SETUP

3.1

Set temperature unit

Power the meter on by pressing
Press and hold
temperature unit blinks. (°C or °F)
Use
Press button-
Note: °C = 5/9 (°F -32)
Continue with MTC temperature value setting by following instructions or press button-
back to the measurement screen.
3.2

Set MTC temperature value

After the temperature unit setting, the meter goes to setup the MTC temperature value setting.
Use or
Press button-
Continue with calibration standard setting by following instructions or press button-
back to the measurement screen.
Find Quality Products Online at:
until the setup icon
or buttons to select the temperature unit.
to confirm your setting.
buttons to adjust the value.
to confirm your setting.
GlobalTestSupply
www.
STARTER 300C Portable pH Meter
.
appears on the display and the current
.com
to go
to go
sales@GlobalTestSupply.com