Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
Make sure you have the correct plugs before mounting the wall bracket.
Do not mount this product on drywall.
▶Distance min/max from the wall: 70mm
▶Tilt angle: -15º/+10º
PARTS INCLUDED
A.- 4 x M10x50 - plastic anchors
B.- 4 x M8x50 - heavy duty screw
C.- 4 x M8x25 - mounting screws
D.- 4 x M6x20 - mounting screws
E.- 4 x M5x20 - mounting screws
F.- 4 x M8 / M6 - washers
G.- 2 x M4x40 - tightening bolts
H.- 4 x M8 - spacer
WARNINGS
▶Pay special attention to safety during the installation process of
heavy objects
▶This bracket is only suitable for flat screen TVs
▶Keep children away during installation
Note
In order to avoid accidental damage or injury, it
is recommended that this product be installed by
a professional. The supplier is exempt from any
responsibility for damages or injuries caused by improper
installation
INSTALLATION
▶1. The wall or mounting surface must be capable of supporting the
combined weight of the mount and display; On the contrary, the
structure must be reinforced.
▶2. Locate any pipes, cables, or any other obstacles in the wall where
you are going to install the bracket before drilling.
▶3. Appropriate tools and safety equipment must be used. Failure to
do so may result in injury or damage.
▶4. We recommend two people for installation. Do not attempt to lift a
Instruction manual
▶5. Follow all instructions and recommendations regarding proper
DRYWALL INSTALLATION
Use a stud finder to locate two adjacent studs where you want to install.
your mount. Use the wall plate as a template to mark four holes.
Drill a pilot hole at each marked location.
Attach the wall plate to the wall using the concrete anchors and lag
screws provided.
heavy screen without assistance.
ventilation and location to mount your screen.
ref. 50135
ES
PT
EN
FR
Publicidad
