Descargar Imprimir esta página

Makita XHU09 Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Hold the tool with both hands, hold the front handle
while pressing the switch lever and pull the switch trig-
ger, and then move the tool forward.
Fig.23
For basic operation, tilt the shear blades toward the
trimming direction and move it calmly and slowly at the
speed rate of 3 to 4 seconds per meter.
Fig.24
To cut a hedge top evenly, tie a string at the desired
height and trim along it.
Fig.25
If the chip receiver is attached to the shear blades, it
gathers discarded leaves and makes clean-up after-
ward much easier.
Fig.26
To cut a hedge side evenly, cut from the bottom to top.
Fig.27
When trimming to make a round shape (trimming box-
wood or rhododendron, etc.), trim from the root to the
top for a beautiful finish.
Fig.28
13 ENGLISH

Publicidad

loading