Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Brand-new are count handheld digital multimeters featuring remarkably stable and reliable
operations. They are designad with the large-scale integrated circuits and dual integral ND
converter and also offer overload protection for all ranges. The series can measure DC&AC
voltage, DC&AC current, resistance, capacitance, diode, transistor, temperatura, frequency,
battery and continuity, which make it a perfect solution for your work.
This instrument is designad and manufacturad in compliance with: GB4793, IEC61010-1,
IEC1010-2-032, CATII 600V, Pollution Degree 2 and Double lnsulation standards.
Warning!
Please operate the instrument as specified in the manual, otherwise the protection offered
by the instrument would be compromised.
•
Ensure that it cannot be operated befare the back cover is put in the place, otherwise there
is a risk of electric shock.
•
The range switch shall be installed at the correct position.
•
Check and ensure the insulation layer of the test leads is in good condition without damage
and broken line.
•
The red and black test leads should be insertad in the proper terminals and ensured with
good contact.
•
The input signal is not allowed to exceed the limit value to avoid electric shock and damage.
•
Switching the range is strictly prohibited during the measurement of voltage and current in
arder to avoid damaging the instrument.
•
Use only the replacement fuse with the same model or identical electrical specifications.
•
In order to avoid electric shock, the potential difference between common port "COM" and
the "
" earth is not exceeded 600V.
•
When the voltage to be measured is more than 60 DC or 30 Vrrns AC, you must be careful
to avoid electric shock.
12
OVERVIEW
SAFETY INFORMATION
Publicidad
