EINHELL TE-HA 18 Li Manual De Instrucciones página 11

to check the lead content of the paint to be
removed. LEAD-BASED PAINT SHOULD ONLY
BE REMOVED BY A PROFESSIONAL AND
SHOULD NOT BE REMOVED USING A HEAT
GUN. Persons removing paint should follow these
guidelines:
1 . Move the workpiece outdoors. If this is
not possible, keep the work area well
ventilated. Open the windows and put an
exhaust fan in one of them. Be sure the fan
is moving the air from inside to outside.
2 . Remove or cover any carpets, rugs, furniture,
clothing, cooking utensils and air ducts.
3 . Place drop cloths in the work area to
catch any paint chips or peelings. Wear
protective clothing such as extra work shirts,
overalls and hats.
4 . Work in one room at a time. Furnishings
should be removed or placed in the
center of the room and covered. Work
areas should be sealed off from the rest of
the dwelling by sealing doorways with drop
cloths.
5 . Children, pregnant or potentially pregnant
women and nursing mothers should not be
present in the work area until the work is done
and all clean up is complete.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. On/Off switch
2. Handle
3. Nozzle
4. Ejector
5. LED-indicator
6. LED Speed 1
7. LED Speed 2
8. Belt clip
9. Wide jet nozzle
10. Refl ector nozzle
11. Reducer nozzle
12. Battery pack (not included)
13. Pushlock button
14. Battery capacity indicator
15. Battery capacity indicator button
Anl_TE_HA_18_Li_USA_SPK7.indb 11 Anl_TE_HA_18_Li_USA_SPK7.indb 11
EN
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless Heat Gun
•
Original operating instruction with safety
information
Separately available accessories
18V 2.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
The cordless heat gun is designed for heating
shrink-fi t hoses, for removing paint and for
welding and shaping plastics.
Danger!
The equipment is not allowed to be used to ignite
charcoal.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
- 11 -
14.12.2022 14:57:50 14.12.2022 14:57:50