Novus Attenzia neo Manual De Instrucciones página 6

en Translation of the original user
manual
1.1 Key to pictograms
Key to pictograms
ATTENTION
Important information
Read user information/
safety instructions
Technical data
Operation
Caution!
Risk of electric shock.
Disconnect device from the power supply.
The power plug is used to disconnect the
power supply.
Connect device to the power supply.
The mains connection must conform to the
light's specifications.
Compliance with the relevant EU safety dir-
ectives
The certification attests that the product
complies with the device and product safety
legislation.
Protection class I
Operation with protective earth conductor
connection
ON/OFF
Press multifunction switch briefly once
Set setpoint value
Press multifunction switch briefly twice
Dim
Press and hold down multifunction switch
Minimum brightness setting
MIN
Maximum brightness setting
MAX
Selected brightness setting
X
Brightness setting saved.
+
Light lights up twice.
OFF
Motion sensor
+
Brightness control
AUTO
1.2 Line break
1.3 Attention
Carefully read through the operating instruc-
tions and safety instructions before putting
the product into operation.
You must follow the instructions. Keep the
operating instructions in a safe place ready
for later reference.
Important information
The product must only be installed and oper-
ated in dry, enclosed interior spaces.
1.4 Intended use. Warranty
Intended use
This light is designed for private use and for use in a
normal office environment.
Only original Novus components approved for the
light may be used.
The surface-mounted light may only be used with a
dedicated
original Novus mount. Subject to technical modifica-
tions.
Wear, damage due to improper use as well as modi-
fications and repairs by third parties are not covered
by the warranty or the guarantee.
1.5 Safety instructions
Safety instructions
You must observe the following instructions:
– Risk of eye damage! Never look directly into the
light source.
– The mains voltage and frequency of your power
supply must match the specifications on the name-
plate of the light. Ensure that the light can be dis-
connected from the power supply at any time.
– Only use the light with the supplied connection
cable. The mains socket must be easily accessible at
all times.
6 / 44
de
en
cs
es
pl
it
fr
nl
ar
ru