EarthQuaker Devices Aurelius Manual De Instrucciones página 7

Recalling a preset:
Select the desired preset you wish to use with the Preset selector switch and
do one of the two following actions:
1. When the pedal is activated and the effect is in use, hold down the
footswitch for at least 0.75 seconds, and it will switch from Live Mode to
Preset Mode. You can switch between Live and Preset mode on the fly! Or:
2. Tap the lighted Save/Recall switch. The switch LED will turn from green to
red, indicating you are now in preset mode. Tap again and the switch LED
will turn from red to green indicating you are in live mode.
Editing/Overwriting a preset:
1. Once in Preset Mode (the lighted Save/Recall switch LED will be red), make
the desired changes to any of the controls in the selected preset. The Save/
Recall switch LED will begin to flash red, indicating a change has been
made to the stored preset. Any controls that are not changed will remain
as previously saved.
2. Hold the Save/Recall switch down until the LED flashes between green
and red and then release.
3. The Save/Recall switch LED will return to static red and the previous
preset has been overwritten.
Helpful preset tips:
• Different EXP assignments can be saved in each preset!
• Presets can be stored and overwritten when Aurelius is in Live Mode or
Preset Mode.
• To make changes to an existing preset, you must first be in Preset Mode
before making the desired changes.
• There is no undo for preset saving, so make sure you are not overwriting
your favorite sound, especially when you are saving presets from
Live Mode!
7