EarthQuaker Devices Aurelius Manual De Instrucciones página 8

EXPRESSION CONTROL
Use any TRS expression pedal to take control over the Width, Rate or Balance!
Aurelius ships with the EXP jack mapped to the Rate. Follow these steps to
reassign the EXP functionality:
1. Insert the expression pedal TRS plug into the EXP jack.
2. Place the expression pedal in the toe down position.
3. Turn the panel control on the Aurelius that you wish to put under control
of the expression pedal. It doesn't matter how far or which direction you
turn the control.
4. Put the expression pedal in the heel down position.
5. This control is now assigned to the EXP jack and can be used with an
expression pedal!
Helpful expression assignment tips:
• If you turn the control that is assigned to the EXP jack while the expression
pedal is plugged in, the panel control will override the expression pedal
setting. The expression pedal will reassume control the next time it is used.
• Different EXP assignments can be saved in each preset.
• You can use Control Voltage with the EXP jack! The CV range is 0 to 3.3v.
TRS expression pedal wiring:
Tip ...........................................Wiper
Ring .........................................+3.3V
Sleeve .................................. Ground
FLEXI-SWITCH
This device features Flexi-Switch Technology! This relay-based, true bypass
switching style allows you to simultaneously use momentary and latching-
style switching.
8
TECHNOLOGY
®