Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
1. Remove the screws (24) from each side plate.
2. Remove the mounting screws (25) and spacers and
discard the old scraper.
3. Install the new scraper.
4. Reinstall the mounting screws (25) and spacers and
tighten them.
9.3
REPLACE THE IMPELLER
WARNING
Use only approved replacement scrapers.
1. Remove the 5 screws (24) and side wear pad (26) that
secure the right side cover (31).
2. Remove the nut (27).
3. Remove the 5 screws (24) and side wear pad(26) that
secure the left side cover (31).
English
4. Remove the belt (28).
5. Using a socket wrench, remove the large pulley (29).
6. Remove the screws (24) that secure the left side plate.
7. Pull the axle (30) and remove the old impeller, install the
new impeller.
11
EN
24
30
Publicidad
