Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshoot ing guide
The following checklist will help you remedy the problems you may encounter with your unit.
Before going through the checklist below, check the connection and operating procedures.
General
Problem
No sound.
The contents of the memory
have been erased.
Indications do not appear in the
display.
No beep sound.
CD/M P3 f iles playback
Problem
A disc cannot be loaded.
Playback does not begin.
M P3 files cannot be played
back.
M P3 files take longer to play
back than others.
A disc is automatically ejected.
CD w ill not be ejected.
The operation buttons do not
function.
The sound skips due to
vibration.
The sound skips.
Downloaded from:
Cause/Solut ion
•Cancel the ATT function.
•Set the fader control to the center position for two-speaker
•Rotate the dial clockwise to adjust the volume.
•The power cord or battery has been disconnected.
•The RESET button has been pressed.
Remove the front panel and clean the connectors. See
"Cleaning the connectors" (page 24) for details.
•The beep sound is cancelled (page 23).
•If you connect an optional amplifier and do not use the built-
Cause/Solut ion
•Another CD is already loaded.
•The CD is forcibly inserted upside down or in the wrong
Defective or dirty CD.
•Recording was not performed according to the ISO 9660 level
•The file extension ".MP3" is not added to the file name.
•Files are not stored in MP3 format.
After the unit reads all files on the disc, playback may take
more time than usual if:
– the number of folders or files on the disc is very large.
– the folder and file organization structure is very complex.
The ambient temperature exceeds 50°C (122°F).
You have closed the front panel or pushed the disc forcibly
into the unit while the unit was ejecting the disc after you
pressed Z.
t Press the RESET button.
Press the RESET button.
•The unit is installed at an angle of more than 60°.
•The unit is not installed in a sturdy part of the car.
•Defective or dirty CD.
•The CD-R/CD-RW has been damaged.
https://www.usersmanualguide.com/
system.
t Store again into the memory.
in amplifier, the beep sound will be deactivated.
way.
1 or level 2 format, or the Joliet or Romeo in the expansion
format.
continue to next page t
27
Publicidad
