Makita EB5300TH Manual De Instrucciones Original página 12

Set the stop control lever to
1
Stop control lever
tion. And make sure that the throttle lever is set to low
speed position.
Stop switch Throttle lever
into the primer pump.
1
2
Choke lever Primer pump
7 to 10 pushes.
Even the primer pump is pushed excessively,
the compression. Then pull the starter handle strongly.
NOTICE:
NOTICE:
-
your body or it may not rewind appropriately.
2
When the engine starts, down the choke lever to
1
open position.
throttle.
warm enough, never open the choke lever suddenly.
Otherwise, the engine may stop.
or low.
Warm-up is complete when quick engine accelera-
the handle several times rapidly to discharge any
12 ENGLISH
Otherwise released starter knob may hit
In cold temperature or when the engine is not