Makita EB5300TH Manual De Instrucciones Original página 21

Engine not starting or with Ignition system
Fuel supply
Compression
Warm start problems -
Engine starts but dies Fuel supply
Several systems may simulta-
- Before
Engine oil Inspect /
Replace
Tightening Inspect
parts (bolt,
nut)
Cooling air Clean /
inlet inspect
Fuel tank Clean /
inspect
Throttle trig- Check
ger / throttle
lever
Stopping the Check
engine
Inspect /
speed
Air cleaner Clean
Inspect /
necessary
Ignition sparks.
No ignition sparks.
No compression when pulled
over.
Starter not engaging.
Engine idling poor.
After
- -
- - -
- -
- -
- -
- - -
- -
- -
- -
- -
- - -
21 ENGLISH
pression system, mechanical
STOP-switch operated, wiring
Incorrect choke position, carbu-
aged, cylinder or piston rings
spark plug.
Broken starter spring, broken
Carburetor contaminated, have
it cleaned.
carburetor contaminated.
supply line interrupted, cable or
clogged, exhaust duct in the
cylinder clogged.
- - -
- -
(Note1)
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- -
-
-
-
-
Before
-
-
-
-
-
(Note3)
-
-
-
-
-