Graco Turn2Me i-Size Manual Del Usuario página 9

17
Press the release button to
remove side impact protection.
Height Adjustment
for Head Support and Shoulder
Harnesses
18 20
See images -
Please adjust the head support
and check if the shoulder
harnesses are at the correct
18
height according to .
When used rear facing, the
shoulder harness height must be
even with child's shoulders.
When used forward facing, the
shoulder harness height must be
even with child's shoulders.
19
Lift up the head support
19
adjustment lever , meanwhile
pull up or push down on the
head support until it snaps into
one of the 6 positions. The head
support positions are shown as
20
.
Using in the Rear
Facing Mode
(Child height 40cm-105cm/Child
weight 19.5kg/infant - 4 years old)
21 30
See images -
Please install the child restraint
on the rear vehicle seat, and
then put the child in the child
restraint.
21
Press the ISOFIX adjuster button
and pull the base back from the
vehicle seat.
22
Press the rotating button to
rotate for easier side loading/
unloading of the child, then
rotate back to desired direction.
23
If a tighter install or increased
cabin space is required, then
press the ISOFIX adjuster button
and push to adjust.
24
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
The load leg must be installed
correctly with green indicator.
After the child is placed into the seat,
check whether the Shoulder Harness
Straps are at proper height.
25
Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the
proper length.
26
Unlock the buckle of the
harnesses by pressing the red
button.
27
Fix the buckles on the both
sides of seat to make placing the
child in rear facing mode more
convenient.
15
28
Use Infant insert is for children's
protection.
We recommend using the full infant
We recommend using the full infant
insert while the baby is under 60cm insert while the baby is under 60cm
and can be used until they outgrow and can be used until they outgrow
the infant insert. The infant insert
the infant insert. The infant insert
increases side impact protection. increases side impact protection.
Detach the snaps on the head Detach the snaps on the head
support to remove the head portion
support to remove the head portion
of the insert. of the insert.
Remove the head support portion Remove the head support portion
of the infant insert when the child's of the infant insert when the child's
head no longer fits comfortably.
head no longer fits comfortably.
Remove the body portion of the Remove the body portion of the
infant insert when the infant's infant insert when the infant's
shoulders no longer fit comfortably.
shoulders no longer fit comfortably.
1 1
2
2
Remove the infant insert cushion Remove the infant insert cushion
by detaching the snaps to allow by detaching the snaps to allow
more space when the infant does
more space when the infant does
not fit comfortably. not fit comfortably.
The cushion can be used separately The cushion can be used separately
without being attached to the
without being attached to the
insert to bolster the infant's back insert to bolster the infant's back
for more comfort.
for more comfort.
16