Care And Maintenance; Care And Cleaning - EDM 08753 Manual De Instrucciones

Mouse Sander
Operating Instructions
• All persons who work with the equipment or enter the
workplace must wear a protective dust mask. • Eating,
drinking and smoking are prohibited at the workplace.
• Paints containing lead are not allowed to be used!

Care and Maintenance

Keep the ventilation openings clear and clean the product
regularly. This machine requires no special mechanical
maintenance such as greasing the bearings.
If something unusual occurs during use, switch off the supply
and remove the battery pack. Inspect and repair the tool
before using it again. The repairs must be carried out by a
qualified technician.
Repair of the tool must only be carried out by a qualified
If there's any defective found of the battery pack, it must be repaired or replaced
by the assigned serviced organization
Environmental Protection
This product is marked with the selective sorting symbol on waste electrical and electronic equipment. This means that
this product should not be disposed of with household waste but must be supported by a collection system in accor-
dance with Directive 2012/19/UE. It will then be recycled or dismantled to minimize impacts on the environment,
electrical and electronic products are potentially hazardous to the environment and human health due to the presence
of hazardous substances.
INSTRUCTION MANUAL
EN
repair technician.
Repair or maintenance by unqualified personnel can lead to
a risk of injury.
Use only identical spare parts for repairing a tool.

Care and cleaning

Cleaning of plastic parts is disconnected machines, using a
soft damp cloth and a mild soap.
Never immerse the machine and do not use detergent,
alcohol, petrol, etc.
In case of problems or for a deep cleaning, consult the manu-
facturer, its service agent or a similarly qualified person to
avoid a hazard.
REF. 08753