Publicidad
Idiomas disponibles
Idiomas disponibles
Before using for the first time
NOTE!
RISK OF DAMAGE!
If you open the packaging carelessly with a sharp knife or other pointed objects, the
handheld vacuum cleaner may be damaged.
Open the packaging carefully.
„
1. Remove the handheld vacuum cleaner from the packaging.
2. Check that the delivery is complete.
3. Check whether the handheld vacuum cleaner or the individual parts show any damage. If this is the case, do not
use the handheld vacuum cleaner. Contact the service address given in the Customer Service section.
Prepare charging devices
Table charging base
1. Position the charging base
you can turn the connected parts over and secure the charging base with 4 screws.
3
2. Insert the mains plug
into the hole provided on the underside of the charging base and guide the cable through
the recesses.
3. Place the charging base near a properly installed socket.
4. Plug the mains adapter
2
Wall charging station
1. Attach the fastening ring
2. Screw or attach the wall charging station
3. Insert the mains plug
3
into the hole provided on the underside of the wall bracket.
2
4. Plug the mains adapter
Storage station with charging function
30
1. Insert the metal tube
the cables are aligned at the bottom, otherwise the storage unit cannot be plugged in correctly. (fig. G)
29
2. Place the storage unit
the battery facing backwards.
3. Insert the mains plug
3
into the hole provided on the back of the storage unit 29. You can secure the cable with the
brackets on the back of the metal tube 30.
Charging the battery
You have the
choice of charging the battery in the machine, removing it for charging or using a charging station.
Make sure that the handheld vacuum cleaner is switched off for charging.
Option 1 (without charging station)
- Insert the mains plug
3
into the charging socket
- The battery
4
can remain in the mains unit or be removed for the charging process.
Instruction manual
22
23
on the charging foot
into a properly installed socket.
28
to the wall charging station
27
near a properly installed socket.
into a properly installed socket.
into the corresponding hole in the base plate 31. Make sure that the attached holders for
30
on the metal tube
with the holder for the main unit facing forwards and the holder for
1
at the top of the battery.
until you hear a „click". (see fig. B) For additional security,
27
(fig. H).
GB
25
Publicidad
