GB
- This provides storage for the main unit, spare battery and 3 small brush attachments. (Fig. C)
Storage station with charging function
- See section „Preparing charging facilities" for assembly instructions.
- The storage station provides storage for the main unit, the spare battery and a variety of other accessories.
(Fig. I)
Emptying the dust container
1. Switch off the handheld vacuum cleaner.
2. Hold the handheld vacuum cleaner with the suction opening
25
3. Press the release button
4. Fold the suction opening
5. Turn the dust container
9
filter 8.
9
6. Put the dust container
back on the handheld vacuum cleaner and turn it clockwise.
7. Close the suction opening
Remove metal filter and Hepa filter
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can cause damage to it.
Clean the Hepa filter regularly, especially after sucking in fine dirt, such as flour or coffee.
1. Switch off the handheld vacuum cleaner.
9
2. Remove the dust bin
(see section „Emptying the dust bin").
8
3. Remove the metal filter
4. Remove the hepa filter
7
by pulling it out of the metalfilter with a finger (see Fig. E).
5. Clean the filters (see section „Cleaning").
7
back into the metal filter 8.
6. Put the Hepa filter
7. Put the metal filter
8
back on the handheld vacuum cleaner and turn it clockwise to tighten.
8. Put the dust container
9
back on the handheld vacuum cleaner and turn it clockwise until it clicks into place.
Change the Hepa filter at an interval of approx. 6 months.
Cleaning and user maintenance
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can cause damage to it.
Never immerse the handheld vacuum cleaner in water for cleaning and do not use
28
Instruction manual
(see Fig. D).
10
backwards and empty the dust container 9.
anticlockwise and remove the dirt residues from the dust container
10
again. The suction opening
by turning it anti-clockwise.
10
facing downwards over a waste container.
10
is properly engaged when you hear a click.
9
and from the metal