BYK o-visc RT Lite Instrucciones página 10

byko-visc RT Lite
6 Viscosity Measurement
1. If protective cap is attached, turn it clockwise to remove.
2. Move spindle attachment upwards, insert spindle and release attachment.
3. Tap measurement icon in main menu to access measurement screen.
4. Lower unit into sample and tap green Start button.
2
4
5
1
2
3
4
5
6
7
8
9
10
11
12
Touch areas of the screen with measured data to access corresponding setting.
10
1
3
6
7
8
11 9 12
TTS / TTT Counter for Time to Stop or Time to Torque
Viscosity Average of measurements - taken every spindle revolution, tap unit
to change
Maximum Maximum value, depending on current spindle and speed
Speed Current spindle speed in rotations per minute (RPM), tap value to
change
Spindle Identifier for current spindle, tap entry to change
Torque Current value in percent: Values < 15% or > 95% indicate that speed
or spindle settings should be changed (invalid measurement)
Temp. Current temperature of sample in °C or °F (if temperature probe is at-
tached), tap to change unit
Graph Live updating graph of viscosity over time
Start Green Start button: Start and resume measurement
Pause Blue Pause button: Pause measurement
Stop Red Stop button: End measurement and save results
Help White Question mark: Open context-sensitive help
BYK-Gardner GmbH
10
300 003 477 - 2301