Publicidad
Idiomas disponibles
Idiomas disponibles
4. Power the camera to a 230V power source using the 12V/2A
power adapter included in the package.
Note: We recommend configuring and testing the camera before
mounting it in the final location.
Quick setup. Adding the camera to the application
without a cable.
Note: the camera must not be connected by cable to the router.
•
Connect the mobile phone to the WiFi 2.4GHz network of
the router. Activate "Location" on your phone.
•
In the CamHi Pro application, click on the "+" icon.
•
Select the "IP camera" option.
•
In the following interface, select the "New device" option.
•
Click on "Power is on, next step".
•
In the following interface, select the "Not connected to the
network cable" option.
•
Select the "AP distribution network equipment - Go add"
option.
•
Scan the QR code on the camera.
•
Wait for the application to identify the camera
•
Wait for the application to identify the camera. Connect to
the camera's AP.
•
Select the WiFi network you want to connect to and add the
network password. To finish, press "Configure wireless and
add".
Note: If the procedure fails, reset the camera by pressing the
reset button on the wire or the reset button on the mainboard and
repeat the steps above.
User manual
6
Publicidad
