Husqvarna AUTOMOWER FlexiFence Manual De Usuario página 10

To charge the battery
Charge the battery fully before you start the product for the first time. The
battery is fully charged when the LED indicator is constant orange. The
product does not operate while it charges.
1. Remove the cover of the product.
2. Remove the sealing cap of the product.
3. Connect the USB-C charging cable into the charging socket.
4. Connect the USB-A charging cable into a power supply unit.
5. Connect the power supply unit to a power outlet.
6. Examine if the LED indicator on the product flashes orange to make sure
that the battery charges.
Note:
The 5 V power supply unit with USB socket is not included.
Note:
If the product is not used for a long time, charge the battery to
a minimum of 60% each 3 months. Charge the battery of the product to a
minimum of 60% before you start the product after long-term storage.
LED indicator of the battery capacity
The LED indicator comes on when the battery state of charge of the product is
less than 10%. To show the LED indicator when the battery state of charge is
more than 10%, push the ON/OFF button for 5 seconds.
Light
Green solid LED
Green LED flashes
slowly
10
Operation
Cause
The product is on and the battery state of charge is
more than 30%.
The product is on and the battery state of charge is
10-30%.
1685 - 004 - 26.10.2022