Hayward 3429LEDBL Manual Del Usuario página 8

EN
Junction box (Ref. 3495EURO) (not supplied)
• Connect the sheath of the light to the 3/4" outlet located at the base of the junction box, making another hermetic seal.
• Use the connection blocks supplied with the junction boxes to connect the light to the power supply, twisting the cables
and firmly tightening the screws of the connection terminals.
Transformer power
• A transformer with a secondary voltage of 12 V (12.5 V depending on the model) must be used. The power of the latter
must be in line with the power of the light to be connected (minimum power = 9 VA for a white bulb and 13 VA for an
RGB bulb).
• In all cases, the sum of the power of the lights must be less than or equal to the power of the transformer.
• It is necessary to have independent protection for each light. It is necessary to ensure protection at the transformer output
using 2 A fuses or circuit breakers (see the following diagram).
Example
with 2 lights
230V
12V
2A protection 2A protection
Light 1 Light 2
Only use Hayward ® replacement parts
8
L
N
230V
Example
with 1 light
12V
2A protection
Light 1
Rev. C