HAMPTON BAY BAYFIELD Guía De Uso Y Mantenimiento página 10

Assembly - Hanging the Fan (continued)
3
Making the electrical connection
WARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/
downrod assembly (D) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.).
□
The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (D) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (B), if you do not wish to cut the wires, you
will need to neatly wrap them.
Please refer to remote installation
instructions at the beginning of
this manual.
9
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM