Publicidad
Protection guard mounting
1. Open the clamp lever and match the protruding parts on the inside of the
guard protection, push the wheel guard down until the protruding parts engage
and rotate freely with the corresponding slots in the shaft cover.
2. With the clamp lever open, rotate the wheel guard to the desired working
position.
3. Secure it by pushing the clamp lever.
Wheel
guard
1
Disc Assembly
1. Fit the inner flange onto the axis.
2. Set the disc onto the inner flange.
3. Set the outer flange onto the axis.
• Press the axis lock into the grinder head.
4. Screw the outer flange with the lock nut wrench until
securely fastened.
Auxiliary handle assembly
CAUTION
• Before performing any operation,
always make sure that the auxiliary handle is installed
firmly. Screw the auxiliary handle in one of the 2
positions according to the operator´s preference and
application.
8
ENGLISH
2
Slot
Preparation
3
5/8-11-UNC-1A
Two-prong
wrench
3
2
Disc
Inner
flange
Grinder
head
4
External
flange
1
Publicidad
