Publicidad
STEP 11
å
Fasten one EXTENSION RAIL (1) to the LEFT END (F).
Use three 1/2" FLAT HEAD SCREWS (23).
NOTE: For each EXTENSION RAIL, turn a SCREW into
å
the 1st hole shown in the diagram. Then, slide the
inner cartridge of the EXTENSION RAIL in to find the
other holes that line up with the holes in the END.
Turn a SCREW into each hole.
1
st
whiskersupport.com
1
23
1/2" FLAT HEAD SCREW
(3 used in this step)
1
st
1
F
Open end
429421
Open end
Page 17
Publicidad
