Descargar Imprimir esta página

Beper P206VEN152 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
2 in 1 Standing Fan Use Instructions
Children must not play with this appliance.
Cleaning and maintenance cannot be carried out by unsupervised
children. For the safety of children and pets, remove and dispose
of all packaging material before use.
This fan is intended for home use only, as described in this manual.
Any other use is to be considered improper and, therefore, dange­
rous.
Description of product Fig.A-B
1. Front grill
2. Blade stopper
3. Blade
4. Back grill blocking nut
5. Back grill
6. Motor shaft
7. Speed selection knob
8. Swing pin
9. Tilt adjusting screw
10. Upper pole fixing screw
11. Upper pole
12. Lower pole fixing screw
13. Lower pole
14. Base
15. Base fixing screw
16. Grill locking screw
Assembling Fig. A-B
Remove all packaging materials, making sure to dispose them correctly and to keep them away from children
and pets. Place the fan to be assembled on a flat and stable surface. Proceed as indicated in Fig. A from a to
h. To assemble the fan at the lowest height, install the main unit directly on the lower pole; to assemble the
fan at maximum height, install both poles.
Important: while assembling the grill, make sure to line up the lines found on the front and back
grill, as indicated in fig. A-h.
Warning: make sure to securely fix all components, to avoid dangerous vibrations during opera-
tion of the fan.
Operation
Select the desired fan speed by turning the speed selection knob; place the knob on 0 to switch the fan off.
Press the swing pin downwards to activate swing function; pull it upwards to deactivate this function.
It is possible to adjust tilt angle with the tilt adjusting screw.
Warning: adjust the tilt angle only when the fan is off; do not force the movement, to avoid dama-
ging the tilt mechanism.
Cleaning and maintenance
Before carrying out any cleaning operations, switch the fan off and disconnect the plug from the wall socket.
To clean the fan use a soft cloth, slightly dampened with water if needed.
Do not use alcohol or chemical agents such as diluents, or abrasive products in general.
Do not spray water or other liquids directly on the fan, to avoid dangerous infiltrations.
Dry thoroughly all parts before switching the fan on.
When not in use, store the fan in a cool, dry place.
11
EN

Publicidad

loading