Schwaiger LED 300 Manual De Instrucciones página 20

USER GUIDE
Step 4
Take the mounting plate and choose the desired position
on the wall.
Mark with a pencil the position of the holes to be drilled
later.
Make sure that the mounting plate is horizontal.
A spirit level integrated into the top edge of the mounting
plate helps you to check the level.
NOTE
For an optimal hold, we recommend to drill at least 4
holes for mounting the camera. Depending on the condi-
tion of the surface, more can be needed.
Step 5
Drill the previously marked holes in the wall and then
insert the plugs into the drilled holes.
WARNING!
Make sure that there are no electric wires or pipes in the
wall at the points where you drill the holes.
Step 6
Carefully push all wires through the large central opening
of the mounting plate.
Then tighten the screws to fix the mounting plate to the
wall.
NOTE
When tightening the screws, make sure that the top edge
of the mounting plate is level.
20