Schwaiger LED 300 Manual De Instrucciones página 22

USER GUIDE
Step 10
The tilt angles of both the floodlight and the camera unit
can be adjusted.
To do this, carefully loosen the screws shown on the
picture and position the units as you wish.
Then tighten both screws again.
IMPORTANT!
Tighten the screws for angle adjustment only slightly! Do
not attempt to remove the units from the ball heads.
Step 11
Now that the camera has been successfully mounted, you
can reset the breaker or reactivate the corresponding
electric circuit. (ON position)
Step 12
Now the camera can be added to the app for later control.
22